psp 3.71 Bricked while using XMB

August 7th, 2016

i am screwed up… now…. i install the 3.71 xxxx and i have the same version…. Darx_alex.. now i have done everything and install in flash 0 and have back-up 0… i did everything and now my psp is not opening accept showing blac screen and turning off again… i replaced the old back-flash its happening the same again…. now where i have done wrong.. can anyone help me thank you i still can go into my recovery mode.
can someone send me there back-up of flash 0 …. or any idea
===================================================
Ok if i use your Flash back-up will it run again… as i got screwed up .
Now completeing Screwed up …. I cannot go to recover Mode

Answer #1
Go to recovery mode and recover to 1.5 I had some problem and it once, recovery should always work.
Answer #2
ya… i know… but now its completely Black out mate…. No use… i tried many times to go to recover mode but its not happening….. Its completely Bricked now i need to change the Chip…. anyone a good suggestion.
Answer #3
ya... i know... but now its completely Black out mate.... No use... i tried many times to go to recover mode but its not happening..... Its completely Bricked now i need to change the Chip.... anyone a good suggestion.
the only way to unbrick is to have a pandoras battery !!!!!!!!
Answer #4

the only way to unbrick is to have a pandoras battery !!!!!!!!

+1
Answer #5

alex8 wrote: Select all


the only way to unbrick is to have a pandoras battery !!!!!!!!

+1
+2
Answer #6

alex8 wrote: Select all


the only way to unbrick is to have a pandoras battery !!!!!!!!

+1
+2
Answer #7
Yeah get yourself one from datel they’re cheaper then a new psp and a magic memory stick shouldn’t be so hard to make if you have any kind of cardreader.
Answer #8
Ya your going to need to use pandoras battery, this is a pretty simple thing to make as long as you can get use of another homebrew able PSP. If not there is another way that for which, you will have to take apart the PSP battery and soder some stuff (Need to be good, and have fine tiped iron)
You could also go to one of the sites that (The the lager citys) Help you find people in the area who will do it for free. Or pay someone to do for you. There are tons of people on the PSP help site that can do it. (As well as me )
Answer #9
If you are on 3.71 M33/M33-2/M33-3/M33-4 and Semi-bricked Download and extract the RECOVERY folder.
Recovery Folder:
http://www.mediafire.com/?1y1ymjb4ffd
Place the RECOVERY folder in /PSP/GAME folder (Use Recovery Menu and toggle USB if you can’t boot to XMB)
Then go to Recovery Menu and select RUN PROGRAM AT /PSP/GAME/RECOVERY/EBOOT.PBP
Then Follow The Instructions.
If you still cant boot into recovery mode, your going to need to use pandora to get it working again.
As stated above. Make one yourself (but i wouldnt reccoment using a soldering gun, as i used a screwdriver to pry it off.) or buy the tool.
Answer #10
You need the gun to soder the wires o mke it into a pandora . Why would you use that to open it? lol
Answer #11
I think pandoras batter should do the trick. Not sure on the details though. Check out some external psp forums for more information and guidance.