problem with psp 2000 and HEN
March 17th, 2018
plz help :d
can no one help me??
Please don't double-post, use the edit button instead. Members are allowed to double or triple post only if their previous post has exceeded the maximum characters limit.
~IdGiT
but then i runned a game and sundly my psp fel out
I am confused on this part. Did the game fall out of the umd slot. Did you drop your psp? Can you reword your sentence?
My PSP 1.5 > 3.02 oe a > b > semi-brick > 3.03 oe a
Restart the psp.
Hold R to access recovery menu
Activate usb mode
DELETE the RECOVERY folder.
Create a /PSP/GAME/BOOT folder on the PSP
Get the Dark Alex 3.03 update ( Not an easy installer) Get it here : -
http://www.psp-hacks.com/file/998
You will also need the 1.50 and 3.03 official updates
Get them here :-
http://www.psp-hacks.com/category/36
Open the 3.03 update folder you just downloaded and copy the EBOOT.PBP file from the oeupdatemaker folder ( not the % one ) to the BOOT folder you created on your PSP
Rename the two firmware updates you just downloaded to :-
The 1.50 EBOOT renamed to 150.PBP
The 3.03 EBOOT renamed to 303.PBP
Copy both these files to the BOOT folder on your PSP
Go back to the recovery mode on the PSP
Select the configuration option from the menu
Enable the `AUTORUN PROGRAM AT /PSP/GAME/BOOT/EBOOT.PBP` option
Come back out of recovery and re-start your PSP
If all goes well the update maker should run
Now you need to watch this carefully as when it has finished it will re-start your psp for you. if you dont catch it quick it will just run the update maker again. (when it has finished there will be green writing on the screen to tell you it will restart in 5 secs - as soon as this appears hold the off button for 3 secs to total off the PSP)
Re-start the PSP and go into recovery mode again ( hold r)
Enable usb
Check inside the BOOT folder on the PSP and there should be the DATA.DXAR file
It should be about 17,944 kb in size
If it is not then you were not quick enough to turn off the PSP after the update maker ran and it has overwritten the file. just run the update maker bit again and be quicker
Delete everything inside the BOOT folder on the PSP except the DATA.DXAR file
Go back to your downloaded 3.03 update folder.
Now copy the EBOOT.PBP file from the 303oeflasher folder ( not the % one ) to the BOOT folder on your PSP
You should have just the EBOOT.PBP from the 303oeflasher folder and the DATA.DXAR file in the BOOT folder on the PSP
Go back to the recovery menu on the PSP and make sure the `Autorun program` option you used earlier is still enabled.
Re start the PSP
The update should run ( red writing on the screen )
When finished it will tell you to re start the PSP
Do this but make sure you hold R as you do to go back into recovery.
Enable usb mode and delete the BOOT folder off the PSP.
Re start again
You should be back to 3.03 oe.
My PSP 1.5 > 3.02 oe a > b > semi-brick > 3.03 oe a
Restart the psp.
Hold R to access recovery menu
Activate usb mode
DELETE the RECOVERY folder.
Create a /PSP/GAME/BOOT folder on the PSP
Get the Dark Alex 3.03 update ( Not an easy installer) Get it here : -
http://www.psp-hacks.com/file/998
You will also need the 1.50 and 3.03 official updates
Get them here :-
http://www.psp-hacks.com/category/36
Open the 3.03 update folder you just downloaded and copy the EBOOT.PBP file from the oeupdatemaker folder ( not the % one ) to the BOOT folder you created on your PSP
Rename the two firmware updates you just downloaded to :-
The 1.50 EBOOT renamed to 150.PBP
The 3.03 EBOOT renamed to 303.PBP
Copy both these files to the BOOT folder on your PSP
Go back to the recovery mode on the PSP
Select the configuration option from the menu
Enable the `AUTORUN PROGRAM AT /PSP/GAME/BOOT/EBOOT.PBP` option
Come back out of recovery and re-start your PSP
If all goes well the update maker should run
Now you need to watch this carefully as when it has finished it will re-start your psp for you. if you dont catch it quick it will just run the update maker again. (when it has finished there will be green writing on the screen to tell you it will restart in 5 secs - as soon as this appears hold the off button for 3 secs to total off the PSP)
Re-start the PSP and go into recovery mode again ( hold r)
Enable usb
Check inside the BOOT folder on the PSP and there should be the DATA.DXAR file
It should be about 17,944 kb in size
If it is not then you were not quick enough to turn off the PSP after the update maker ran and it has overwritten the file. just run the update maker bit again and be quicker
Delete everything inside the BOOT folder on the PSP except the DATA.DXAR file
Go back to your downloaded 3.03 update folder.
Now copy the EBOOT.PBP file from the 303oeflasher folder ( not the % one ) to the BOOT folder on your PSP
You should have just the EBOOT.PBP from the 303oeflasher folder and the DATA.DXAR file in the BOOT folder on the PSP
Go back to the recovery menu on the PSP and make sure the `Autorun program` option you used earlier is still enabled.
Re start the PSP
The update should run ( red writing on the screen )
When finished it will tell you to re start the PSP
Do this but make sure you hold R as you do to go back into recovery.
Enable usb mode and delete the BOOT folder off the PSP.
Re start again
You should be back to 3.03 oe.
i don’t have a recovery menu
but then i runned a game and sundly my psp fel outI am confused on this part. Did the game fall out of the umd slot. Did you drop your psp? Can you reword your sentence?
i started a downloaded game in cso formate but there was somthing wrong with the game so my psp fell out
Please don't double-post, use the edit button instead. Members are allowed to double or triple post only if their previous post has exceeded the maximum characters limit.
~IdGiTSee if you can hook it up to the computer. If so use Hellcat’s Recovery Flasher 1.60.
http://www.consolespot.net/forums/psp-homebrew/23821-released-hellcats-recovery-flasher-1-60-a.htmlSee if you can hook it up to the computer. If so use Hellcat’s Recovery Flasher 1.60.http://www.consolespot.net/forums/psp-homebrew/23821-released-hellcats-recovery-flasher-1-60-a.htmli can’t run Hellcat’s Recovery Flasher 1.60 cuz i can’t go under games or recovery mode :s
your psp is 100% BROKEN!!!!!!!, you messed around with the flash on your psp NEVER MESS WITH THE FLASH IF YOUR PSP HAS A TA-088V3 MOTHERBOARD!!!!!!, since you have a TA-088v3 motherboard, you cannot use a pandora on your psp battery.
sorry but you destroyed your psp, is it still under warranty? (you bought a extended 2yr warranty for example).
sadly you now have a new brick, people have been waiting a few years to find out to fix a bricked ta-088v3 motherboard sadly no one has figured it out.
my advise? go on craiglist or ebay and buy a new psp, if your psp is out of warranty sony will allow you to trade it in for a new one for $90? Price of a brand new psp $160, $160-$90=$70, sony will give you a trade in value of $70 dollars for your broken psp.
your psp is 100% BROKEN!!!!!!!, you messed around with the flash on your psp NEVER MESS WITH THE FLASH IF YOUR PSP HAS A TA-088V3 MOTHERBOARD!!!!!!, since you have a TA-088v3 motherboard, you cannot use a pandora on your psp battery.
sorry but you destroyed your psp, is it still under warranty? (you bought a extended 2yr warranty for example).
sadly you now have a new brick, people have been waiting a few years to find out to fix a bricked ta-088v3 motherboard sadly no one has figured it out.
my advise? go on craiglist or ebay and buy a new psp, if your psp is out of warranty sony will allow you to trade it in for a new one for $90? Price of a brand new psp $160, $160-$90=$70, sony will give you a trade in value of $70 dollars for your broken psp.DAMN