MOBO and graphic card

As topic,
Do we have any diagnostics tools to test my MOBO and graphic card running fine ?
BSOD start happen frequently.
Answer #1
everest ultimate is a good monitoring app
check the “sensors” section to see it your temps are good
Answer #2
You can never be sure about these things, so I say if you have overclocked anything, reset it to standard values, and then download and run these programs.
Prime95 – CPU torture test, this is rarely the problem but if you don’t check it how will you know?
http://www.mersenne.org/freesoft/
Furmark – GPU torture test – this is what you also need to run for some time (1-3 hrs)
http://downloads.guru3d.com/MSI-Kombustor-(Furmark)-0.7.0-Beta-download-2461.html
The last thing which is most likely is your RAM, I had 2 sticks of RAM from 2005 that was the most expensive at the time and one of the sticks broke, and I couldn’t figure it out, but by removing 1 RAM stick and checking if it crashed, I knew.
For RAM do this :
1 : if you have 2 sticks take one out and boot the system and do what you do normally that causes the BSOD – TURN OFF THE COMPUTER BEFORE AND UNPLUG IT FOR SAFETY!
2 : if you have 4 or 3 sticks, just do as 1 says, remove all sticks but leave one RAM module plugged in, boot and you will see which module is the culprit.
A RAM torture test I used was Memtest, its a free software.
http://hcidesign.com/memtest/
I hope this helps you, if not reply back
Answer #3
Exactly what said, u can test the individual components but not the mobo on its own.