i need help with remotejoy

August 5th, 2016

Ok i don’t understand how to install remotejoy on Windows 7 64 BIT PRO
can u tell me how.

Answer #1
1) Installation
(a)Setup for PSP (Files are in /RemotejoySDLGUI/PSP FW 3.XX OE)
---[1]Copy the PSPLink folder from PSP FW 3.XX OE into ms0:/PSP/GAME/.
---[2]Copy everything from SEplugins in to ms0:/seplugins/.(if you don't have the folder just create one.)
---Move On.
(b)Setup for Your Computer
---[1]put the "bin" file on the Desktop (Recommended, because you won't need it after.)
---Move On.
2)Driver Installation
Now Comes the Tricky Part.
---[1]Link your PSP with USB via computer.
---[2]Run program PSPLink V3.0 OE"
---[3]*Tricky* Your computer will show you that it has detected a new device. Make sure it says detected "PSP Type B" not "USB Device". (If it says USB Device please go to Appendex A below the guide.) Leave the window aside, we will use it later.
---[4]Execute the inf-wizard.exe in the "bin" file. Press next and choose the device that says PSP Type B in the Description coloum. Press next. Change the manufacturer name into Sony and press next. Save your file as "psp.inf" in the "bin" folder(and press save). Then press finish.
---[5]Back to the "New Device Window"(Showing "PSP Type B"). Choose "Install from a list or specific location (Advanced)" and press next. Click Have Disk and press browse, and select to look in the "bin" folder. Click OK, and move on. This is when your computer starts to look for the psp.inf file. If the computer asks where "libusb0.sys" is browse to the "bin" folder.
---[6]After the Driver installation is done on Windows, go to device manager and click View-> Show Hidden device, to show the hidden device, haha. Under LibUSB_Win32 catagory right click and choose property on "PSP Type B". if the Manufacturer says Sony, your okay!!
Now for fun~
3)Showing Your XMB
---[*]Disable all your plugins from the Recovery Menu. Plug your PSP with USB via Computer.
---[1]Execute RemotejoyGUI.exe from the RemotejoySDLGUI folder.
---[2]Start USBHost FS from the GUI (this might open when you execute the program the step before.)
---[3]Start PSPLink v3.0 OE on your psp. the USBHost FS will show "Connect to device".
---[4]Start PSPSH from the GUI.
---[5]StartWindow Mode with FPS from the GUI.
---[6]Under PSPSH Commands press "reset vsh" (going back to your xmb).
---[7]Under PSPSH Commands press "load vsh" then "load Rjoy PRX" and your psp screen will show on your computer!
4)Showing Your Game
---[*]Enable psplink.prx and remotejoy.prx plugins from Recovery Mode. Plug your PSP with USB via computer.
---[1]Execute RemotejoyGUI.exe from the RemotejoySDLGUI folder.
---[2]Start USBHost FS from the GUI (this might open when you execute the program the step before.)
---[3]Go into your game, make sure you have started playing. Pause the game.
---[4]Start PSPSH from the GUI.
---[5]You Have 4 Choices. Window with/without FPS. Fullscreen with/without FPS. Choose one.
---[6]go to the PSPSH command windows (there should be a host0:/) and type in: %loadjoy.
---[7]Start Playing!!!
Press F3 if you see nothing.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
APPENDEX A
Why Does it show "USB Device" but not "PSP Type B"? Because your PSP might be hardware downgraded or downgraded with an older version of downgrader. Anyways....
---[1]Copy Everything from Key Repair into ms0:/PSP/GAME/.
---[2]On your PSP go into the program "ID Storage Change". Press X to start, and it will exit itself after it's done. Some users (like me) will show that you don't need to use this and exits back to the XMB. Don't Worry, just keep on going.
---[3]Then go into ID Storage manager and press X all the way until it goes back to the main menu. press O to exit.
---[4]Enter ID Storage Repair. You Should See This:
42 is a 6 b-up : 1
is6right : 1
is4right : 1
key 5 good? : 1
isFinalDGed : 1
is43right : 1
is47right : 1
is41rihgt : 1
Can Run 1.5 : 1
Your PSP is already repaired
(Mine: is47right :0, but it still works)
---[5]Done! Back to Step 5 in Driver Installation.

installation tutorial video
http://www.youtube.com/watch?v=-ZPe0eLL9L8
driver installation tutorial video
http://www.mediafire.com/?aecvadahmuj
Answer #2
Thanks dude

 

| Sitemap |