help RAM
February 2nd, 2020
i have a problem pls help me..
i buy a RAM 1gb and i test it is work then i have 1gb another ram
..
I put in together on my motherboard slot then its not work the monitor switch is blinking ..but when i put a 1gb ram
and 256mb ram its work…
may problem is how to work may two 1gb ram?
my two 1gb ram is different brand.. but the seller of the ram its say its ok to combine.. i tell my old ram brand and he said its ok..
here the spec. link> http://img717.imageshack.us/img717/4691/specl.jpg
thanks
Please remember that ALL links must be coded,
including, but not limited to, e-mail addresses, passwords, and internal links.
Coded for you this time.
~psaila_mike~
Provide the exact models of both RAM sticks (read from the label)
Yes as Roberto said, You could provide exact models of Ram since I believe if you are going to put two 1gb rams of different models/type that could generally cause this issue.
Provide the exact models of both RAM sticks (read from the label)
http://www.rsun.com.ph/view_item.php?item=MED037
and
http://www.rsun.com.ph/view_item.php?item=MED043
Please remember that all links must be coded,including, but not limited to:
e-mail addresses, passwords, and internal links.
I've coded the link(s) for you this time - if you don't know how to do it, please check the sticky thread in the helpdesk section.
Nikos
Both sticks are double sided and have the same voltage/timings
so they should work fine together but that’s clearly not the
case here,If each stick works standalone then try updating
the BIOS,If that doesn’t work you’ll have to replace it
for a different one.
how to upgrade the bios??
hmmm how about my OS xp sp2?? it is possible to this oS?
Download the update from ACERs website for
your specific model:
http://www.acer.com/worldwide/support/download.htm
and no it has nothing to do with your OS.
OS ManufacturerMicrosoft Corporation
OS NameMicrosoft Windows XP Home Edition
Version5.1.2600 Service Pack 2 Build 2600
BIOS Version/DateAmerican Megatrends Inc. R02-A1, 4/17/2006
Processorx86 Family 15 Model 4 Stepping 9 GenuineIntel ~3059 Mhz
Sr.
im here in the philippines but my pc is buy on dubai.. what location i fill up there?
Whip out the motherboard manual and find the reset button. Sometimes this is the answer.
Sr.
im here in the philippines but my pc is buy on dubai.. what location i fill up there?
Asia pacific
Or The ram you brought might not be compatible with your Mobo. Well happened to me once.
Those two ram chips are 800 MHz ?, and looking at Acer site it says the board supports 400/533/667 MHz
http://support.acer.com/acerpanam/desktop/0000/Acer/AspireT650/AspireT650sp2.shtml
It could just be a case that there not compatible with each other, I dont think messing with the bios will help or anything to do with
the OS
Whip out the motherboard manual and find the reset button. Sometimes this is the answer.
There’s no such button,Only a jumper which
should be located near the battery which
can be used to reset the bios,Usually
one would have to unplug the power cord,move
the jumper to pins 2-3 and leave it there for ~15 seconds
then put back to pins 1-2,re-plug the power cord and power up.
I somewhat doubt it’d help but i guess there’s no harm in trying.
Or The ram you brought might not be compatible with your Mobo.
That’s why i told him to update the Bios,Bios updates improve
memory compatibility among other things.
Those two ram chips are 800 MHz ?, and looking at Acer site it says the board supports 400/533/667 MHz
That’s fine,DDR is backwards compatible,It’d just run at 667.
ill to reset using jumper.
if the ram is same brand same size its possible to work?
ill try jumper reset its not work..
hmmmm.. if the both ram are same brand its possible to work?
Sr.
im here in the philippines but my pc is buy on dubai.. what location i fill up there?
Asia pacific
http://img153.imageshack.us/img153/2369/90629586.jpg
Sr. to those two what ther can i choose? the left or right?
thanks
closed this thread problem solve.