Does HDD totally dead?
August 8th, 2016
EDIT:
[Solved] for windows 10, for HDD is not.
The problem with win10 is starting from here: https://www..org/viewtopic.php?p=88479173#88479173
and it is not on this HDD which is diying. ===========
Problems start from yesterday, i stopped Defragler, first i though i make some problems with that but when i check Hd senti there is much bigger problem hdd is daying. I backup files right now i will probably all save it. I would like to know just for experiment what to use to try to fix it and to isolate bad sectors? Maybe just to use it to his end to download there movies which i want to watch or it will really be dead for about four days?
I don’t think so after 4 days your HDD totally dead but keep the backup of your important data and use it for only spare space for store and watch movies only as long as it works!
It’s probably stuffed….Make sure it’s cables are good and seated properly at both ends..
Then try HDD Regenerator..
https://www..org/viewtopic.php?t=20918629&highlight=
Use something like HDD Regenerator..
It might take some t5ime recover all the bad sectors but it will be as good as new once done..
First:Check its cable open it & reconnect
Then run HDD Sentianal again
second: If problem exist->>
Check Surface test,Using HDD Sentinal:
Notes the sector number,then use HDD Regenarator Bootable USB/CD(Search in Application section)
Point out the starting sector(Bad)-End Sector
This will save your time.
Finally:
Hard Format your each partition(don’t forget to backup your data):
Better to format in using Hirens boot environment.Run surface test again.
Edit:
===
Picture showing that problem is in E drive, so hard Format it using Hirens boot Environment or Windows Environment(Before that, Back up your data).Then Check your partition Using AOMEI Partition Assistant(Search in Application section),Delete partition then re-partition it.
Many thanks for suggestion! I will try all of it i next one, two days.
Tomorrow i will do what you told me because i still moving data on other HDDs. It is appreciably slower moving than when it was all normal. Do i have to create boot disk for hd regeneration or i can from windows? This will take probably a lot of times i can’t use PC if i run from boot but if it will help i will do it. What do you think about spinrite?
https://www.grc.com/sr/spinrite.htm
Situation is worst
Looking at your screenshot, because your faulty drive is not your system drive, Regenerator should run OK from Windows.
Bit of a tutorial here.
http://hddregenerator.net/hdd-regenerator-works/
Spinrite is pretty old now and has to run from a boot disk.
HDD Regenarator:
https://www..org/viewtopic.php?t=14282722&highlight=
Create Bootable USB->Boot from USB(I think u better know,how to boot from USB)
It will take long time,depending the size of your HDD & number of bad block(Repair process is very sluggish),so keep patience
Finally i can start to do some repair and to see what will happen.
Do i have to do something in hd sential or to go immediately with hd regeneration? 
=======
I run HD regenerator.
What was the result of HDD Reg,I am just curious. Run surface test & Let us know
This is for now
After hd regenerator to run surface test (read test) from hd sentie?
This is for now
After hd regenerator to run surface test (read test) from hd sentie?
Does HDD Regenarotor Repaired all Bed sector found If so,then it will be worth to run surface test…for recheck
PS:
==
You better know,surface test only detect bed sector,but not able to repair it.
I think there is bigger problem… it doesn’t move. What this mean?
I think there is bigger problem... it doesn't move. What this mean?
Backup your data immediately Erase all data Using CCleaner(Must be perform in Hirens Boot Environment)
Hard Format each partition using Hirens Boot Environment(Previously mentioned).
Check HDD again,Delete each partition,Re-partition again. If problem persist , the only solution is low-level format
I have to stop this? It wont move how i see.
A simple software correcting utility will repair some bad blocks if you are lucky. The hdd seems to be damaged, so the programs will be ineffective and/or will take a lot of time to complete: the disk not reading properly the sector, has to run again and again on the same trace to trying to complete the reading. There is a hardware timeout after many operations. The problem is that with a very damage hard drive, the completion bar moves only thanks to the hardware timeout and it will take long.
@
I am doing this for experimental purpose. If i fix it i wont important data save on it.
@
Why i have to erase all data? It is already empty, i deleted both partition and now i have only one.
I have to download first Hiren’s boot disc and to burn on disc. Which program to use from it to do format?
I stopped this.
I have to download first Hiren's boot disc and to burn on disc. Which program to use from it to do format?
Partition Tools —> Acronis Disk Director
i make bootable cd with hiren’s 15.2. i ran it (i didn’t expect win7 last time when i use it it was ver about 8 and it start in ms-dos) i didn’t find any of those apps from list (there are a tons in hirens) i just clicked around on desktop too see what it has and decide go leave this from tommorow. i restarted, change bootable priority and when i try to enter in win10 it show only loading screen with small cyan window and loading circle, after some time monitor goes to sleep mode and that is all.
This only could make hirens some problem but i do not know how…i was there few minutes. i hope i will find above mentioned app and to run it and go works over night and to go to sleep.
only what was happen hd regeneration could not successfuly turned off. When i stopped regeneration i showed a window “please wait” for more of 10min. Win10 doesn’t see now error hdd but hd sentinetel see it. probably i have to back in in admin. tools > disk managment but that is not problem right now.
what is happen? how to fix it?
help!
=============
I am now on win7 from hiren’s boot disc. I do not know does hiren’s temp. change partitions of HDDs.
Hiren’s which i downloaded
http://pastebin.com/WWikNKML
Please do not double post, -
#3.7 I It is forbidden to double post on the board. It means that you are not allowed to reply twice in a row in any topic. Use the edit button when altering your reply if you're the last to post in the topic.
#3.14 Removal of moderated messages is not allowed. -
@
Why i have to erase all data? It is already empty, i deleted both partition and now i have only one.
I have to download first Hiren's boot disc and to burn on disc. Which program to use from it to do format?
It can refresh your bad block.After,erasing full data I have seen all bad sector has been disappeared.(This is My personal experience) .I have just erase data then format the affected partition.All is Now fine.
Hiren’s boot disk includes lots of utilities even HDD Low level format tools.No special Format tools requiered
Just right click Each partition(Unticked quick format option),then wait.
If problem still persist,last resources is use HDD Low level format tools(Included in Hirens Boot CD).
Do you have Hirens Boot CD/DVD,if not.Search in Application section or Google it(Since its Completely free).
EDIT:
======
Hmmm! your hard disk now looking good, so what is the problem ? Can you Elaborate ?
HDD is not good, but i have new and primary problem. Win10 won’t to boot. I do not have idea how that is happened. Please read post above Posted: Fri Sep 11, 2015 2:55 am
I am now on hiren’s win7. Win10 doesn’t work anymore.
HDD is not good, but i have new and primary problem. Win10 won't to boot. I do not have idea how that is happened. Please read post above Posted: Fri Sep 11, 2015 2:55 am
I am now on hiren's win7. Win10 doesn't work anymore.
First you have to correct your HDD problem, then think about Win 10.Isn’t it logical ?
Windows 10 Recovery Disc Professional Edition for Free:
https://www..org/viewtopic.php?t=21706962&highlight=
I do not have to correct HDD problem right now because dead HDD is storage disc and it is empty i copy pasted all files on other two HDDs. As i said it wont be used anymore for any important data if i repaired it. HDD where is system (win10) is ok but win10 won’t to boot anymore and i do not know why. I described the problem above.
I started safe mode for win10, there are some repair possibilities i tried system restore but is reported there is no system restore i know it is turned on and it already has several s.r. but why doesn’t see it i do not know.
what i can do before i download Windows 10 Recovery Disc Professional Edition for Free ?
=======
I ran Error-checking (from hiren’s win7) to see what will find and partition where is Win10 which is now E: with some reason (probably hiren’s temp. change partitions). It found some errors, i didn’t do screenshot.
Set bios back to normal, if you have not already, so that it boots straight to the hard drive with Win 10 on it..Could be the problem.
You can use your Win 10 installation disk to do recovery, if you have one..
http://windows.microsoft.com/en-us/windows-10/repair-recovery
Set bios back to normal, if you have not already, so that it boots straight to the hard drive with Win 10 on it..Could be the problem.
I did that of course. I describe what it is happen. It start loading screen of win10 after several seconds monitor go to sleep mode and nothing happend any more. I have to restart on maincase on button.
I have win10 on usb flash, i will try to repair from it. It wont touch other data on C: ? It change just Win10 data?
It tells you here..
http://www.windows10forums.com/articles/reset-windows-10-when-windows-wont-boot.14/
You could try selecting “Advanced Options”When you get to the “Troubleshoot” screen.
Then you might get away with a Startup repair or even be able to access any Restore Points.
BTW…In theory, if you try booting windows several times and it does not work, You should get the blue ‘Choose an Option’ screen pop up..
It may either be something you did for error or the PC has some bigger problems that we think. Try checking the hard drive where Windows is installed and browse the folder to check if everything is still there.
Open the cmd as administrator and type
wmic
After this, type:
diskdrive get status
You can also use a more detailed software to check the SMART status in a verbose mode.
If the files are still there and the hard disk seems okay, you can download the Windows installation disc and reinstall the boodloader with bcdboot.exe
bcdboot.exe X:\Windows /s Y:\ /f ALL /l en-us
Replace X with the drive where the Windows folder is located and replace Y with the fat32 system folder. You can replace with your locales in the form language-country: en-uk for example.
@ I do not like i have to remove all apps. i installed. I 2,3 ago i just finished migrate from win7 to win10 and configure all apps. But if i do not have any choose i will do that before that i want to try something more. This is the last what i want to do
@
X:\Users\Default>wmic
wmic:root\cli>diskdrive get status
Status
OK
OK
wmic:root\cli>
fat32 system folder has to be: C:\Windows\System32
To reinstall boot it sound good. I have on usb flash win10. Maybe this will te best choose. Noobody doesn’t talk about hiren’s disc. Can it make some problems? Did i download and install on disc right version? It looks as some custom made hiren’s disc.
All what i do after i make bootable hiren’s disc are next:
– go to bios > change primary boot to dvd
– run hiren’s win7 mini > tried to find Partition Tools —> Acronis Disk Director i didn’t find of any apps i do not know where they are, i only see about 20 on desktop but this hiren’s has about 50-100
– clicked on several apps on desktop to see maybe i will find some list (shortcut) of apps and to install them. I decided to leave this for next day.
– went to bios again and back to primary hdd where is win10
– win10 wont to boot > restart on button, again the problem.
– put cd win hiren’s and boot win7 mini again
– then i did check for errors on partition where is win10 it find something and for all writes it is correct.
– i tried again to boot win10 but all the same
– back here i wrote what is happen.
– above we wrote about problem with hd regeneration it wasn’t by pass errors on storage disc which has error it stucked on 3.9%. I tried to stopped it witch esc, it back to menu then i put a number to close a window. Before close the window it wrotes “please wait” and that stucked too for about ten minutes, hdd regeneration didn’t respond too. I went to restart win10 and to start hiren’s disc. As you see i have problem to describe issue on english. Please if you do not understand something tell me and i will try to explain again.
=====================================================================
I am not sure what is better to do next. To say what is happen or never to ask anything anymore… I said monitor goes to sleep mode now when i try again to boot win10 and when i see what is happening with monitor i doubt on… the most stupid thing which can be happen in all these sh*ts . Somehow stupid win10 sent picture as primary display on my TV !!!!!
=====================================================================
Today is not so stupid, i get this error: Critical Error: Start menu and Cortana aren’t working…
====
edit:
It is fixed for win10
I think this HDD is for trash. It is already working over 2,3h.
The HDD seems beyond repair. The fat32 system partition is not system32. It’s a separate small partition that contains the booting softwares. In that partition you will install the required components to start the booting process.
It is going to trash, it is over with this hdd.
I just took SS.
Thanks to everyone who participated in topic. You helped me a lot and i learned something new too