Internet explorer and Firefox stop working please help

February 8th, 2020

hello everyone,
my internet explorer stopped working it would just be buffering , i installed fire fox which now is doing the same.
I Tried to down load windows 8.1 but down load fail all the time. i have legit windows 8 , but my pc did not came with the cds to do
fresh start. any ideas on what i can do to get my internet explorer working again. how can i do fresh start with out the cds?
thank you guys so much

Answer #1
You possibly a restore partition..
Look up your system Manual..
Answer #2
Do you mean buffering when you try and watch a video?
Answer #3
i men buffering as it when a web page is trying to open.
Answer #4
If it’s not actually an app crash or freeze, it sounds just like you have slow connectivity. I assume you’ve done the usual Speedtest checks, and checked your line quality, etc.?

[SOLVED]Downloader Needed

February 8th, 2020

hi all,
does anyone know what app i can use to d/l from rapid as a free user instead of usdownloader please?any suggestions welcome.
thanks.

Answer #1
I heard that jdownloader is good for free users but I never tried.
Answer #2
ok thanks.will give it a try.
Answer #3
rapget or rapidshare manager, IDM or flashget
Answer #4
thanks but dont think flashget works with free user d/l’s
Answer #5
I heard good things about JDownloader, not used it myself tho
Answer #6
I have been using JDownloader for a pretty long time and I’m very happy with it. Also it doesn’t only support rapidshare, you can download from many different file hosts and it presents many different functionalities; link checking, autoreconnection, autoextracting rar files,etc.
Answer #7
i tried jdownloader but doesnt work
Answer #8
its completely different setup for me now. i used to use jdownloder but all of a sudden its stop working

TV bitrate?

February 8th, 2020

Does anyone here know the SDTV bitrate?
I have an old 24″ TV I found in my attic, the quality is amazing on this thing xD

Answer #1
It’s analog, so there isn’t any ‘bitrate’
Answer #2

D r e a M wrote: Select all

It’s analog, so there isn’t any ‘bitrate’
So, what is there if there’s no bitrate?
Answer #3
It’s a continuous signal, not a digital transmission.
http://en.wikipedia.org/wiki/Analog_television
Your digital tv is receiving a signal of 1’s and 0’s – and how fast it gets it is called the bit rate (because any one 1 or 0 is a “bit”).
An analog tv gets a continuously variable signal like a radio station (not digital radio!). It’s like your eyes, a constant stream of information.
Answer #4
It's a continuous signal, not a digital transmission.
http://en.wikipedia.org/wiki/Analog_television
Your digital tv is receiving a signal of 1's and 0's - and how fast it gets it is called the bit rate (because any one 1 or 0 is a "bit").
An analog tv gets a continuously variable signal like a radio station (not digital radio!). It's like your eyes, a constant stream of information.

Thanks for that link, I’m amazed by what we idiot humans can do, really.
Amazing quality, but what is the resolution then on a 24″? xD
Answer #5
i think you might be trying to look for standard definition telly’s http://en.wikipedia.org/wiki/Standard-definition_television
Answer #6
Is it an old CRT TV?
CRT TV’s have a resolution of 720×576 (PAL) or 720×480 (NTSC) It looks “better” because it scales the image however, it doesn’t have a “native resolution” like LCD screens, so you can watch any kind of ancient 320×200 signal even, and it will look pretty nice. And becuase it’s a pretty blurry image always, you don’t notice small faults in the quality, that’s why DVD rips look “better” on them than on LCD screens.
Answer #7
CRT TV's have a resolution of 720x576 (PAL) or 720x480 (NTSC)
that’s DVD resolution, not TV resolution
Display resolution
Main article: Display resolution
Common computer and TV display resolutions.
The size of a video image is measured in pixels for digital video, or horizontal scan lines and vertical lines of resolution for analog video. In the digital domain (e.g. DVD) standard-definition television (SDTV) is specified as 720/704/640�480i60 for NTSC and 768/720�576i50 for PAL or SECAM resolution. However in the analog domain, the number of visible scanlines remains constant (486 NTSC/576 PAL) while the horizontal measurement varies with the quality of the signal: approximately 320 pixels per scanline for VCR quality, 400 pixels for TV broadcasts, and 720 pixels for DVD sources. Aspect ratio is preserved because of non-square "pixels".
from
http://en.wikipedia.org/wiki/Video#Display_resolution
see here for “lines” info
http://en.wikipedia.org/wiki/Ntsc#Lines_and_refresh_rate

14 network adapters :| help me

February 8th, 2020

hello .. i just seen my adapter settings n seen these 14 adapters plz tell me what r those n how they came here n how to del them the virtual ones in the pic are for geny motion but dont know about the rest ones
I mainly use only wifi and the virtual ones are on for geny motion I think
Image

Answer #1
They are more than likely all caused by VMs and can be removed:
Tunnel Adapter – Microsoft 6to4 adapter Remover
6to4 adapter is a component used for transmitting IPv6 packets through IPv4 network correctly if you have more than once 6to4 adapter in device manager probably you have the BUG and probably a new Microsoft 6to4 adapter is unexpectedly created after you restart Windows 7 or Windows Server 2008 R2 , you can fix it with Tunnel Adapter – Microsoft 6to4 adapter Remover , download and unpack it finally run for 32 bit systems (x86) i386.exe and for 64 bit systems (x64) ia64.exe
Download: http://www.sordum.com/deneme/6to4/download.php?Down=6to4remover.zip
Source:
http://www.sordum.org/6423/tunnel-adapter-%e2%80%93-microsoft-6to4-adapter-remover/

Answer #2
this program havent done anything .. just cmd window appears n then no devices were removed n then press any key to exit
Answer #3
Right click and delete them.
Answer #4
delete option is not enabled .. n they all r active now
Answer #5
thanks alot i uninstalled them from device manager
Answer #6
this program havent done anything .. just cmd window appears n then no devices were removed n then press any key to exit
One would have to run the software with elevated privileges (right click > run as administrator).

Why is this video streaming so slow?

February 8th, 2020

http://brothershare.com/nmzw2a7gpyr1/The.Legend.of.Korra.S01E05.HDTV.XviD-HWE.avi.mp4
I’ve been working on the server all day and I only I think it’s just people in US that are experiencing slow issues since the server is not US based. Can someone tell me if the buffering time (from the moment you click the video) and what your experience is with the stream is? Ideally, I want you guys (every user) to have a continuous, uninterrupted stream experience. Of course, the file that is uploaded is not native HD quality, so i can’t test the quality, but I want to know if you guys have any buffering/pauses when watching it? Also, can someone let me know what’s the main concerns with stream 1080P? My hardware on the server is okay and I believe it can handle the encoding process, but I’m afraid the proximity is too far for me in the US, so I can’t test to see if people in Europe are experiencing a continuous, uninterrupted stream experience. Do you guys mind uploading a video in 1080p and letting me know in your areas? Been working on this for awhile now trying to get it right, scratching my head. Let me know of your experience, good and the bad. Preferably, bad, as I don’t learn much from good.
Thank you everyone.
Video Specs:
Video info:ffh264, 1581 kbps, 893×500, 23.976 fps
Audio info:faad , 320 kbps , 48000 Hz
Edit:
I’m Downloading, “Non Stop 2014 BluRay 1080p DTS x264-CHD” now. Will post the link to see how 1080P Goes!
I would like to give a coupon for free premium, but I don’t want to advertise. I don’t know where else to get feedback and improvement on my website without “advertising” it. Not trying to show off, just trying to make the best service possible. I’m also in the works of streaming .AAC and .FLAC. Currently .Mp3 is working fine and since it’s just a small file, no need to be worried about feedback and a continuous, uninterrupted stream issue. .AAC and .FLAC on the otherhand, is a different issue, but lets start with the video streaming first.
Edit 2:
Also, planning on implementing subtitles into our videos in the future. I’m pretty excited for this.

Answer #1
Video loads fine for me could be your connection is slow or the host and a good amount of users using at the time you were try to play the video
Answer #2
Video loads fine for me could be your connection is slow or the host and a good amount of users using at the time you were try to play the video
Mind sharing where you’re from? It helps me get a better idea of where the video works best, if you know what I mean.
Answer #3
USA Texas true download speed of 6.5mbs to 7mbs
Answer #4
USA Texas true download speed of 6.5mbs to 7mbs
Okay nice, what do you think about everything? What are some things you don’t like about the site and the service? I’m currently in the process of uploading the 1080p file, don’t know how long you’ll be looking at this thread, but it’ll probably take an hour and I would like your feedback, thanks.
Answer #5
Buffering is mostly down to their side i’d say, not always of course. I don’t know how much bandwidth you need to provide users for a good experience. But in my case for instance, i can’t even watch youtube without plenty of buffering, and no offence intended, but i’m sure you’re not even close to offering bandwidth they’re providing. So if it’s just you having problems i’d say it’s your own connection. If it’s your users, i’d say it’s theirs.
Answer #6
Buffering is mostly down to their side i'd say, not always of course. I don't know how much bandwidth you need to provide users for a good experience. But in my case for instance, i can't even watch youtube without plenty of buffering, and no offence intended, but i'm sure you're not even close to offering bandwidth they're providing. So if it's just you having problems i'd say it's your own connection. If it's your users, i'd say it's theirs.
No offense taken, I wish I had that problem. To me, it would tell me I’m doing something right. From what you saw from that link I shared, what do you not like about it? And what do you think should be added/included to the functionality of the website? (Uploading the 1080P video now, should be ready to share in a couple of hours, starting from now. It’s 10GB, so bear with me on this experiment.)
Answer #7
I’m not on computer atm, i’m on my phone so i didn’t try your link. Since my net isn’t good enough to stream, i always just download files. But is there really a lot of quality differences between 1080 and 720 when it comes to streaming? My opinion would be to just stick with 720 quality, smaller files for you to store and i’m sure they’d be good enough to watch.
Answer #8
I'm not on computer atm, i'm on my phone so i didn't try your link. Since my net isn't good enough to stream, i always just download files. But is there really a lot of quality differences between 1080 and 720 when it comes to streaming? My opinion would be to just stick with 720 quality, smaller files for you to store and i'm sure they'd be good enough to watch.
Maybe, I’ll stick to 1080P for now and if their is any issues on my side, then I’ll lower it to 720P. Still experimenting with my users and my servers limitations.
Edit: http://brothershare.com/4y7kkx0751pq/Non.Stop.2014.BluRay.1080p.DTS.x264-CHD.mkv

How to convert DVDs

February 8th, 2020

Need help please.
I downloaded a DVD from a torrent,there is a folder called ‘VIDEO_TS’.
Inside are a number of files with exts like ‘bup’ ‘vob etc.
I installed Power DVD Rip Studio,but it won’t recognise these files to convert.
Any ideas please?

Answer #1
either burn it to watch it at your DVD
http://www.gromkov.com/faq/faq2004-0026.html
or convert it for your PC
http://www.ghacks.net/2008/08/21/convert-video_ts-folder-to-one-video-file/
I didn’t fully understand which one you wanted, but i think it is the second, right?
Answer #2
Video_TS/Audio_TS are actual dvd .vob files which come from a dvd from the store.
I use VOB2MPEG doesn’t take very long and keeps the quality. Easy to re-encode from there.
Answer #3
Thanks guys,will check both out.
Answer #4
DVDFab 6 can do either..
Use ‘write data’ to burn your VIDEO_TS folder to a blank dvd to make a normal dvd movie…
Use DVDtoMobile(generic) to convert the movie into an .avi file if that’s what you want..
http://www.google.com?t=2597389&highlight=
Answer #5
go for nero http://www.google.com?p=19611151#19611151
it will do anything you wanna do
or if you just want to play on your pc then download klm codec from
http://www.codecguide.com/download_mega.htm install it and nothing will stop you from playing it.

gsmart arty a3 quadcore smartphone?

February 8th, 2020

hi folks.. just bought one of these for my better half and was wondering if anybody has any positive/negative views on this smartphone there is so little info out there a don’t no anybody else who has bought one does that mean I should’ve stayed well away ? its only a few weeks old but it has done everything its been asked of it so far..so come on guys have I done the right thing? was also trying to buy a spare battery as well but no joy in finding one yit any help would be great thanks….
Answer #1
A few thoughts:
First, does it really matter now? lol I’m guessing there is no going back (ie can’t return etc).
The phone runs 4.4 and for a few weeks, that is the most current version of Android so all is good there.
The only issue with purchasing something not quite mainstream can is that there can potentially be updates and custom ROMs and the like. These customs are built from a particular model of phone. If your phone isn’t a popular one, then chances are you won’t find any custom ROM builds.
Having said this, Gigabyte seems to be updating frequently
http://www.gigabytecm.com/en/goodscontent.php?id=256&type=2
Can’t find anything on xda-developers (probably the @1 place for phone support and customization) but then again, that isn’t a bad thing if you are satisfied with the phone and playstore.
There are review of the phone here too:
http://www.gsmarena.com/gigabyte_gsmart_arty_a3-6584.php
Answer #2
..thanks for your quick response i do understand what you mean i have been looking at this phone for some time and seen some reviews but to be honest was none the wiser, my better halfs samsung phone had so many probs were both now on sim only contracts so expence was an issue it came unlocked with antivirus for a year 4gb memory[which i replaced with 32gb] at £129 i thought was pretty good value for money…
Answer #3
anybody help me to where i can get a spare battery for the gsmart arty a3 please?
Please Do Not Double Post In The Topic, Use The Edit Option Instead To Edit Your First Post!
#3.7 It is generally forbidden to double post on the board. It means that you are not allowed to reply twice in a row in any topic.
Use the edit button when altering your reply if you're the last to post in the topic.

Kindly visit our rules:
www..org/rules
Krypto

Answer #4
Looks quite a reasonable brand of phone
Batteries will probably be available when the phones have been around a bit longer, I would think.
Answer #5
Seems like a capable phone, though the RAM size would probably hinder the CPU processing power
Spare batteries can usually be found off ebay
Answer #6
…thanks for your reply have been looking around ebay amazon ect but to be honest i am not sure what i am looking for but it does say the following on the battery……..Model-AC50B0X, LION BATTERY
RATING-3.7V-2000MAH

“Flash Player Required” Window will not go away.

February 8th, 2020

Image
I have installed the newest version of Flash Player, restarted MSN but I still get this message everytime I start-up my PC. And everytime I get a window update from MSN such as “Name is now online!” it pops up again.
Any solution?

Answer #1
installed flash manually or via the “Install” button?? if not try installing using that button
Answer #2
mate this happend to me u need to uninstall flash player then reinstall that should do the trick
Answer #3
Seems to have worked. Thanks!
Answer #4
Nope, did not work Please don't double-post.
If you feel you have something extra to add to a post, use the edit button instead
~ChillcoRE

Answer #5
You can Force the installation to complete by going to:
C:\Windows\System32\Macromed\Flash\
Double click on the FlashUtil*.exe application (Number Depends on your installed version e.g. FlashUtil10b.exe)
Once finshed you might have to restart but then everything will work
Answer #6
1. Uninstall Flash Player than restart Your computer.
2. Go to Internet Explorer and find and install Adobe Flash Player
3. Restart Your computer again
3. Go to Mozilla, Opera etc… and http://get.adobe.com/flashplayer/otherversions/
than choose your version of browser and install it.
That’s all
Answer #7
Have u Installed Both Version Of Flash Player IE n Non IE??
Answer #8
Have u Installed Both Version Of Flash Player IE n Non IE??
Yes, I Am. First IE, than Firefox version!

Windows 7 SP 1 crack

February 8th, 2020

Will this Uncrack my windows 7?? any crack that will work with it if so thanks
Answer #1
http://news.softpedia.com/news/Windows-7-SP1-Includes-Cracks-Killer-Windows-7-RTM-Activation-Technologies-Update-146504.shtml
Links Coded. Please remember to double check that all your links have been coded -
#3.10 All links must be coded - including, but not limited to, e-mail addresses, passwords and internal links.

Please don't double-post, use the edit button instead. Members are allowed to double or triple post only if their previous post has exceeded the maximum characters limit.
Kindly visit our rules:
www..org/rules

Answer #2
Bump anyway round this i want to install it.
Please don't double-post, use the edit button instead. Members are allowed to double or triple post only if their previous post has exceeded the maximum characters limit.
Kindly visit our rules:
www..org/rules

Answer #3
Where did you saw SP1 for Windows 7?!
Answer #4
Where did you saw SP1 for Windows 7?!
heard there’s a beta out
Public Beta Now Available for Windows 7 and Windows Server 2008 R2 …
http://windowsteamblog.com/windows/b/bloggingwindows/archive/2010/07/12/public-beta-now-available-for-windows-7-and-windows-server-2008-r2-service-pack-1.aspx
Answer #5
Where did you saw SP1 for Windows 7?!
heard there's a beta out
Public Beta Now Available for Windows 7 and Windows Server 2008 R2 ...
http://windowsteamblog.com/windows/b/bloggingwindows/archive/2010/07/12/public-beta-now-available-for-windows-7-and-windows-server-2008-r2-service-pack-1.aspx

BETA ok, but I thought there was official release of SP1
Thanx
Answer #6
Daz loader
From the man himself:
http://forums.mydigitallife.info/threads/8632-Windows-Loader-The-Official-Thread
windows 7 sp1:
http://forums.mydigitallife.info/threads/20748-windows-7-sp1
Answer #7
Daz loader
From the man himself:
http://forums.mydigitallife.info/threads/8632-Windows-Loader-The-Official-Thread
great thanks windows 7 sp1:
http://forums.mydigitallife.info/threads/20748-windows-7-sp1

Answer #8
thanks alot

It is against the rules to make a reply to an old topic unless under special circumstances such as, but not limited to, the topic's discussion has died but there is new striking evidence to turn thoughts around or saying thank you for the author. A reply with information that is relevant and useful is allowed..
-

software similar to Time Machine

February 8th, 2020

I have been using Comodo Time Machine on my PC running Windows 7 but my laptop runs Windows 8.1 and the Time Machine is not compatible and no longer supported by Comodo team.
I am looking for other software that would do the same thing but that would be compatible with Windows 8.1
I case you are not familiar with the Time Machine here is a video of what it is….
http://www.youtube.com/watch?v=J18PKqIE7C8
Than ks
Please remember to double check that all your links have been coded. #3.10 links must be coded - including, but not limited to, e-mail addresses, passwords and internal links.
~~

Answer #1
http://www.makeuseof.com/tag/did-you-know-windows-8-has-a-built-in-time-machine-backup/
Answer #2
I’ve been using this on win 8.1 x64…..works great
http://www.google.com?t=18327115&highlight=
Answer #3
Another app that can do incremental scheduled back ups is Acronis True Image..
http://www.google.com?t=13291214&highlight=
Answer #4
Rollback RX is a good alternative , it supports win 8, however I’m not sure about Win 8.1
Answer #5
Thanks for all the replies. I have some good alternatives here.

« Previous Entries   Next Entries »