Windows xp pro 64bit installation death screen

Hello guys,
I tried to downgrade my windows 7 to windows xp, everything went well except when when i started windows, the blue screen comes up and reboot. so i downloaded windows xp pro as iso and burn on dvd and tried boot from the dvd and install the windows, again everything went well except when i start the windows it shows the blue screen then reboot. the problem the blue screen vanish in one second so i can not read the error message.
does anybody know what the problem is and how to solve it?
thanks
Answer #1
You need to make sure that you have your bios set to sata / ata instead of raid /achi or whatever unless you are using raid.
Answer #2
whats the stop error code when the blue screen comes up?
Answer #3
balkanno replied: You need to make sure that you have your bios set to sata / ata instead of raid /achi or whatever unless you are using raid.
There is no need to change BIOS settings for HardDisk if you don’t get problem during installation
BIOS settings are to be changed to “IDE” in case you get installation errors.
If you have error after installation Re-Install Windows.
Unless Error is “Blue Screen Error” you have to try with any other Windows Xp Version trying With Service Packs.
Blue Screen Error is due to any hardware incompatibility with windows.
Answer #4
The cause of BSOD can be faulty HDD (Bad Sector), Corrupted OS (which requires a re-installation), RAM Issue. Insert the Windows XP Bootable CD and run the following command in the “Recovery Console”
chkdsk /f /r
Regards,
M$