Monitor Problem

July 23rd, 2013

When I plug-in a USB device my monitors sometimes turns off ( like when u go afk for some time and then u move ur mouse back and it turns on ) only in this case it doesn’t turn back w/e i do so i am forced to restart the pc…I downloaded the latest drivers , even tho when i bought the screen didn’t have any included , but the problem seems to persist…what can i do? :S
Answer #1
go to control panel, click on ‘system’ then click the ‘hardware’ tab at the top then click on ‘device manager’ and look for an ‘!’ next to ‘Universal Serial Bus Controllers’ if there isn’t an ‘!’ there just right click on it and scan for hardware changes to look for the problem.
Hope this helps.!
,Dual
Answer #2
my monitors sometimes turns off
what happens if you unplug the monitor USB cable from the PC and plug a USB device directly into that port ?
if this works there may be a problem with your monitor USB port
if you connect the monitor to s diff PC the USB work ok ?
you really should not need a driver for monitor USB, it’s like adding an extension cable or powered hub
Answer #3
go to control panel, click on 'system' then click the 'hardware' tab at the top then click on 'device manager' and look for an '!' next to 'Universal Serial Bus Controllers' if there isn't an '!' there just right click on it and scan for hardware changes to look for the problem.
Hope this helps.!
,Dual

Yea there is no ‘!’ all devices work fine
Answer #4
sounds like a dodgy USB port
Answer #5
My monitor doesn’t end in a USB port?
Monitor : LG Flatron L1972H
Answer #6
plug the cabel out from you’re power supply of you’re pc and monitor. then wait for like 5 minuts and plug al the cabels back in. If the problem is not solved try to use a usb part of you’re font case if that does not work i might be afraid that you’re motherboard is demaged.
Answer #7
i had forgotten my USB in the pc. When i opened it today it wouldn’t start up ( it started till the blackscreen with the various letters and numbers, Verifying DMI Pool Data and Boot from CD/DVD and it just stayed there..I unplugged the USB device then restarted and it opened normally…dunno guys my pc is zzz….
Answer #8
I unplugged the USB device then restarted and it opened normally
you talking about the monitor USB cable ?
if so it sounds like the monitor USB port or cable is bad
Answer #9
sounds more like the USB HUB is shyte remove replace and try again.
Answer #10
edwoodweb replied: I unplugged the USB device then restarted and it opened normally
you talking about the monitor USB cable ?
if so it sounds like the monitor USB port or cable is bad

nope just my flash drive drive

 

| Sitemap |